Your Compass for Pharma Success

OPERATING PROCEDURE FOR TOC ANALYZER

  • PROCEDURE:
  • A TOC analyzer, or Total Organic Carbon analyzer, is a scientific instrument used to measure the amount of organic carbon present in various liquid samples, most commonly water.
  • Procedure for the Operation of TOC analyzer:
  • Connect the inlet line of the TOC analyzer to the Pressurized sample valve and the outlet to the drain.
  • Switch ‘ON’ the main power supply to the system.
  • Switch ‘ON’ the system button on the side of the analyzer.
  • Wait for a minute till it displays systems information regarding Sr. No. Software version.
  • Water from the Pressurized sample valve is filtered through a 60 µm in-line filter.
  • From the displayed screen, press the ‘MAIN’ button.
  • Next press the ‘MENU’ button on the screen. From the displayed screen, press the ‘SETUP’ button & select the mode of analysis i.e.,
  • On-line: – If analyzing samples on-line in water plant.
  • On-line Timer.
  • On-line Average.
  • Grab Analysis:
  • Then in the same screen press configure button.
  • Select ‘REP’& enter the desired number of repetitions.
  • Select ‘REP’& enter the desired number of rejections & press ‘BACK’ button.
  • Then press ‘DATA’ button, in that ‘VIEW’ button, then ‘SETUP’ button. Then press the VALUE button & select the desired configuration for analysis from the following:
  • TOC/TC/IC
  • TOC/IC/Mode
  • TOC/Reagents
  • TOC & Press ‘BACK
  • The measurement display screen show the TOC in parts per billion (ppb) or parts per million (ppm).
  • MAINTENANCE, divided into two sub menus (CONSUMABLES and SERVICE) which checks the period and input the installation date of UV lamp, pump tubing, fan filters and print reports.
  • Press ‘CLEAR’ to exit from the main menu. TC-IC = TOC.
  • REFERENCES:
  •   Not Applicable
  • ANNEXURES: 
  • Not Applicable
  •  ENCLOSURES:
  •   SOP Training Record.
  •  DISTRIBUTION:
  • Controlled Copy No. 01  :          Head Quality Assurance
  • Controlled Copy No. 02  :         Head Engineering
  • Master Copy                    :          Quality Assurance Department
  • ABBREVIATIONS:
No.:Number
SOP:Standard Operating Procedure
TOC:Total organic carbon
ppb:Parts per billion
ppm:Parts per million
  • REVISION HISTORY:             
  • CHANGE HISTORY LOG
Revision No.Details of ChangesReason for ChangeEffective Date
00New SOPNot ApplicableTo be written manual
Share this article
Shareable URL
Prev Post

OPERATION OF HIGH-SPEED DOOR

Next Post

PROCEDURE FOR REPLACEMENT OF HEPA FILTER

Leave a Reply

Your email address will not be published. Required fields are marked *

Read next

SOP FOR MOLYBDENUM TEST

The molybdenum test is a vital analytical procedure used to identify the presence of molybdenum in stainless…
SOP FOR MOLYBDENUM TEST

Discover more from PharmaGuideHub

Subscribe now to keep reading and get access to the full archive.

Continue reading