INVESTIGATION REPORT
Objective
The objective of this investigation is to determine the root cause of the presence of broken glass in an ampoule during the in-process check at the washing stage in the injection manufacturing shopfloor. The investigation also aims to assess the potential impact on product quality, patient safety, and compliance, and to propose corrective and preventive actions (CAPA) to avoid recurrence.
Key Parameter of Below Page:
INVESTIGATION REPORT FOR THE OBSERVATION OF SMALL BROKEN GLASS PIECES IN AMPOULES
Find below pages for complete report
Key Parameter of Below Page:
INVESTIGATION REPORT FOR THE OBSERVATION OF SMALL BROKEN GLASS PIECES IN AMPOULES
Find below pages for complete report
Click the link to download word file copy of this document:
https://pharmaguidehub.com/product/investigation-report-for-the-observation-of-small-broken-glass-pieces-in-ampoules/
Key Parameter of Below Page:
INVESTIGATION REPORT FOR THE OBSERVATION OF SMALL BROKEN GLASS PIECES IN AMPOULES
Find below pages for complete report
Key Parameter of Below Page:
INVESTIGATION REPORT FOR THE OBSERVATION OF SMALL BROKEN GLASS PIECES IN AMPOULES
Find below pages for complete report
Key Parameter of Below Page:
INVESTIGATION REPORT FOR THE OBSERVATION OF SMALL BROKEN GLASS PIECES IN AMPOULES
Find below pages for complete report
Key Parameter of Below Page:
INVESTIGATION REPORT FOR THE OBSERVATION OF SMALL BROKEN GLASS PIECES IN AMPOULES
Find below pages for complete report
Click the link to download word file copy of this document:
https://pharmaguidehub.com/product/investigation-report-for-the-observation-of-small-broken-glass-pieces-in-ampoules/
YOU CAN ALSO READ:
INVESTIGATION REPORT FOR THE UNAVAILABILITY OF DAILY TEMPERATURE MONITORING RECORD FOR REFRIGERATOR
INVESTIGATION REPORT FOR GREEN-COLOURED ALGAE FOUND ON THE WALL OF WATER MANUFACTURING AREA
INVESTIGATION REPORT FOR THE OBSERVATION OF RAW MATERIAL FROM UNAPPROVED VENDOR IN RM WAREHOUSE
INVESTIGATION REPORT FOR LOW HUMIDITY OBSERVED DURING CAPSULE FILLING
INVESTIGATION REPORT FOR THE WATER SANITIZATION FAILURE AS PER DEFINED FREQUENCY
INVESTIGATION REPORT FOR THE AIR CURTAIN OF BATCH DISPATCH AREA NOT WORKING
INVESTIGATION REPORT FOR THE BREAKDOWN IN THE AIR HANDLING UNIT (AHU) SYSTEM
INVESTIGATION REPORT FOR FLY KILLER NEAR DISPENSING AREA WAS NOT IN WORKING CONDITION
INVESTIGATION REPORT FOR LOGBOOK FOR CHEMICAL OPEN AND CLOSE STATUS DID NOT CONTAIN
INVESTIGATION REPORT FOR HIGH POWDER ACCUMULATION IN THE SCRUBBER OF THE COATING AREA
INVESTIGATION REPORT FOR WRONG PRODUCT DESCRIPTION RECORDED IN THE BATCH PACKING RECORD
INVESTIGATION REPORT FOR SHIPPER FELL FROM TROLLEY DURING TRANSFER
INVESTIGATION REPORT FOR ASSAY FAILURE OBSERVATION DURING TESTING OF AMLODIPINE 10 MG TABLETS
INVESTIGATION REPORT FOR THE OBSERVATION OF RUBBER PIECES IN GRANULES AFTER BLENDING STAGE
INVESTIGATION REPORT FOR THE USE OF UNRELEASED RAW MATERIAL DURING THE MANUFACTURING
INVESTIGATION REPORT FOR WRONG MANUFACTURING DATE MENTIONED ON MONO CARTONS
INVESTIGATION REPORT FOR DISSOLUTION FAILURE IN TAMSULOSIN 4 MG PELLETS (PHASE 1)
INVESTIGATION REPORT FOR DISSOLUTION FAILURE IN TAMSULOSIN 4 MG PELLETS (PHASE 2)
INVESTIGATION REPORT FOR PRESENCE OF HAIR FOLLICLE IN COMPRESSED TABLET
PHASE 1 INVESTIGATION REPORT FOR ASSAY FAILURE IN AMLODIPINE TABLETS 10 MG
INVESTIGATION REPORT FOR THE OBSERVATION OF BLACK PARTICLE IN COMPRESSED TABLET AFTER COMPRESSION
INVESTIGATION REPORT FOR WATER LEAKAGE FROM COMPRESSION ROOF
INVESTIGATION REPORT FOR LEAK TEST FAILURE OF BLISTER PACK
INVESTIGATION REPORT FOR WRONG BATCH CODING OBSERVED ON MONOCARTON DURING SECONDARY PACKING
INVESTIGATION REPORT FOR THE OBSERVATION OF A LIVE LIZARD IN THE TABLET QUARANTINE AREA
6M-Based Investigation on Tablet Chipping at Compression Stage
INVESTIGATION REPORT FOR RAW MATERIAL SPILLAGE DURING DISPENSING
INVESTIGATION REPORT FOR OBSERVATION OF FLY IN MANUFACTURING CORRIDOR
