- PROCEDURE:
- Precautions:
- Keep the machine clean and dry always.
- If ducting the smoke always use a suitable concept ducting adaptor.
- If the machine is used in power off mode, then after completion, plug the power supply for a further 5 minutes before disconnecting and storing.
- Starting:
- Connect the mini colt to the appropriate power supply and put the red power switch ON. The red light will glow on.
- After approximately 4 minutes the Green ready indicator will glow on.
- Wait another 10 minutes before making smoke for the best results.
- For maximum smoke output adjust the flow control fully anticlockwise.
- To reduce smoke flow, turn flow control clockwise.
- Insert the colt4 smoke can firmly into the Mini Colt smoke generator to create a seal on the O ring do not over tighten.
- To make the smoke press the green button.
- To stop making smoke release the green button.
- Once hot the Mini Colt smoke generator can make smoke off power for a limited period.
- When the smoke produced starts thin, stop producing smoke and reheat the Mini Colt for 3 to 5 minutes by connecting the power supply.
- Remove the Colt4 smoke can after usage. Part used cans shall be used until empty.
- Stopping:
- After completion of the usage with the machine, plug it into the power supply for a further 5 minutes before disconnecting and storing.
- REFERENCES:
- Not Applicable
- ANNEXURES:
- Not Applicable
- ENCLOSURES:
- SOP Training Record.
- DISTRIBUTION:
- Controlled Copy No. 01 : Head Quality Assurance
- Controlled Copy No. 02 : Head Engineering
- Master Copy : Quality Assurance Department
- ABBREVIATIONS:
| No. | : | Number |
| SOP | : | Standard Operating Procedure |
- REVISION HISTORY:
- CHANGE HISTORY LOG
| Revision No. | Details of Changes | Reason for Change | Effective Date |
| 00 | New SOP | Not Applicable | To be written manual |