OPERATION OF UV CABINET

• OBJECTIVE:

• To lay down the procedure for operation of UV- cabinet.

• SCOPE:

• This SOP is applicable to the procedure for Operation of UV- cabinet at {Company Name} {Location}.

• RESPONSIBILITY:
• Officer/Executive/Designee Quality Control – Shall be responsible for operation as per SOP.
• Head/Designee Quality Control – Shall be responsible for ensuring compliance as per SOP.
• ACCOUNTABILITY:

QA Head shall be Accountable for implementation of SOP.

• PROCEDURE:
  • Ensure that the Instrument is clean and free from dust.
  • Connect the power supply and switch on the Instrument.
  • Open the Cabinet and place the TLC plate inside the chamber and close the chamber.
  • Three switches (red colored) are provided on the right side corner of the instrument.
• Do not look into the burning UV lamp.
• Do not use organic solvents for cleaning of the Instrument.
  • Select the required UV light and switch on the instrument.
  • Observe the plate for visualization of the spot from the observation compartment (Glass window)
  • Switch off the Instrument after the visualization of the plate.
  • General precautions:
• Do not look into the burning UV lamp.
• Do not use organic solvents for cleaning of the Instrument.
• REFERENCES:

Not Applicable

• ANNEXURES: 

Not Applicable

        ENCLOSURES: SOP Training Record.

•  DISTRIBUTION:
• Controlled Copy No. 01  :          Head Quality Assurance
• Controlled Copy No. 02  :         Head Quality Control
• Master Copy                    :          Quality Assurance Department

• ABBREVIATIONS:

• REVISION HISTORY:             

CHANGE HISTORY LOG