PROCEDURE FOR CODING OF SCREENS, MESHES, FBP BAGS AND BELLOWS

• PROCEDURE FOR CODING OF SCREENS, MESHES, FBP BAGS AND BELLOWS:
• Check integrity of screen / mesh & FBP bags before coding.
• Incase any discrepancy observed inform QA by raising NCR as per SOP and shall be investigated.
• Coding shall be done to the Screen, Mesh, FBP bag & Bellows which has passed the Integrity Test.

•       CODING OF MULTI MILL/CONE MILL SCREENS:
• The coding for the screen will be given as PD/XX/YY/NN.

Where,

· PD :- Production department

· XX: – Mill Type. For Cone Mill the code shall be CO, for multi mill the code shall be MM

· YY: – Screen Size.

·       NN: – Serial number starting from 01, 02.. and so on.

• For example, for the first 1.0 MM screen of Multi mill, the coding will be as PD/MM/1.0 /01.
• For example, for the first 1.0 MM screen of cone mill, the coding will be as PD/CO/1.0 /01.
• CODING OF MESHES:

The coding for the mesh will be given as per PD/SFT/XX/YY/NN.

Where,

· PD: – Production department

· SFT: – Sifter

· XX: – Size of sifter

· YYY: – Sieve size

· NN: – Serial number starting from 01,02.. and so on.

• For example, First sieve of 20 mesh of 12 inch diameter Sifter the coding shall be done as PD/SFT/12/20/01.
• The first mesh of 20 mesh of 30 inch diameter coding will be PD/SFT/30/20/01.
• CODING OF FBP BAGS:

• The FBP bags name shall be coded as Product name with embroyding

• CODING OF BELLOWS:

                The Bellows name shall be coded as Product name with embroyding.

• ABBREVIATIONS: