Your Compass for Pharma Success

PROCEDURE FOR COLLECTION, DETOXIFICATION AND DISPOSAL OF EFFLUENT

  • OBJECTIVE:
  •  To describe a standard operating procedure for collection, detoxification, and disposal of effluent.
  • SCOPE:
  • This Procedure is applicable for collection, detoxification, and disposal of effluent at {Company Name} {Company Location}.
  • RESPONSIBILITY:
  • Assistant– SHE.
  • In charge – SHE.
  • Assistant– Maintenance
  • ACCOUNTABILITY:
  • QA Manager shall be accountable for Approval & Implementation of SOP.
  • PROCEDURE:
  • Procedure for collection, detoxification, and disposal of effluent.
  • Collect process Effluents in receiving tank from Production through closed pipe lines by gravity.
  • Transfer the effluent into deactivation reaction tank through the transfer pump from the collection tank.
  • Prepare and keep ready the recommended volume of detoxifying agent (4%sodium hypochlorite solution) in dosing container based on measured effluent volume.
  • SHE personnel should use all PPE while performing deactivation activity.
  • Add detoxifying solution in required quantity(add 2 liters of 4%sodium hypochlorite solution in to approximately 20liters of liquid waste) into deactivation tank through dosing mechanism and perform detoxification activity in the deactivation tank.
  • Keep under maintenance for 48 Hrs. for effective deactivation in the deactivation tank.
  • After completion of maintenance period transfer the deactivation /detoxified effluent in to storage tank.
  • The detoxified effluent through transfer pump is transferred from storage tanks into Pre- treatment tank at Main ETP for further treatment and disposal.
  • Check & ensure the level of the sumps should not cross 3/4th level of its capacity.
  • Preparation of 4% Sodium Hypo Chlorite Solution:
  • If Sodium Hypo Chlorite Solution received in the strength of 4 % shall be directly used for the Deactivation Process.
  • If Sodium Hypo Chlorite Solution received in the strength of 6% The following procedure shall be   followed:
  • To Take 1.3litres of 6% Sodium Hypo Chlorite and add 0.7 Liters of Water to mixed to get 4% Sodium Hypo Chlorite Solution
  • REFERENCES:
  • Not Applicable
  • ANNEXURES:
ANNEXURE No.TITLE OF ANNEXURE
Annexure-IEffluent Deactivation Log
Annexure-II4 % Sodium Hypo Chlorite Solution Preparation and Usage Log Sheet
ENCLOSURES: SOP Training Record.
  • DISTRIBUTION:
Controlled Copy No. 01:Safety Health & Environment
Master Copy:Quality Assurance Department
  • ABBREVIATIONS:

SOP     :           Standard Operating Procedure

QC           :          Quality control

SHE         :          Safety, Healthy & Environment

F&RD :           Formulation and Research Development

API          :          Active Pharmaceutical Ingredient

ETP          :          Effluent Treatment Plant

  • REVISION HISTORY:

                          CHANGE HISTORY LOG

Revision No.Details of ChangesReason for ChangeEffective Date
00New SOPNot ApplicableTo be written manual

ANNEXURE-I
LOCATION OF SAND BUCKETS

LOCATION OF SAND BUCKETS

ANNEXURE-II
4%SODIUMHYPOCHLORITESOLUTIONPREPARATIONAND USAGE LOG SHEET

4%SODIUMHYPOCHLORITESOLUTIONPREPARATIONAND USAGE LOG SHEET
Share this article
Shareable URL
Prev Post

PERMIT TO EXCAVATION WORK

Next Post

PROCEDURE FOR OPERATION OF DRY CHEMICAL POWDER TYPE FIRE EXTINGUISHER

Leave a Reply

Your email address will not be published. Required fields are marked *

Read next

Discover more from PharmaGuideHub

Subscribe now to keep reading and get access to the full archive.

Continue reading