Your Compass for Pharma Success

SPILLAGE HANDLING IN THE LABORATORY

  • OBJECTIVE:

To lay down the procedure for handling of spillage in the laboratory.

  • SCOPE:

This SOP is applicable for the procedure for handling of spillage in the laboratory at {Company Name} {Location}.

  • RESPONSIBILITY:
  • Officer/Executive/Designee Quality Control – Shall be responsible for following the procedure as per SOP.
  • Head/Designee Quality Control – Shall be responsible for ensuring compliance as per SOP.
  • ACCOUNTABILITY:

QA Head shall be Accountable for implementation of SOP.

  • PROCEDURE:
  • Ensure all persons in laboratory working area and surrounding area are cleaned without any spillage.
  • Immediately on spillage, everybody shall be aware in the laboratory inform to lab boys or house -keeping personnel to clean.
  • Solid spillage over the instruments, working bench or floor shall be cleaned with soft nylon brush or mopped with soft dry cloth and discarded in the dustbin.
  • Liquid spillage like acids, alkali or organic solvents shall be diluted with water and mopped with a cloth.
  • Clean up spillage over the skin with plenty of water.
  • If there is a spillage of laboratory chemicals over a person use Eye Washer as follows:
  • Remove the lid of eye washer
  • Allow the water to pass through the pipe for few seconds
  • With one-foot press the paddle, bring your face close to the two nozzles
  • With one-foot press the paddle, bring your face close to the two nozzles of the eye washer so that eyes are in direct contact with the water spray.
  • Continue till the irritation in eyes stops.
  • Remove your foot from the paddle to stop the flow of water and place the lid of eye washer.

Click the link to download word file copy of this document:
https://pharmaguidehub.com/product/spillage-handling-in-the-laboratory/

  • REFERENCES:

Not Applicable

  • ANNEXURES: 

Not Applicable

      ENCLOSURES: SOP Training Record.

  • DISTRIBUTION:
  • Controlled Copy No. 01  :          Head Quality Assurance
  • Controlled Copy No. 02  :         Head Quality Control
  • Master Copy                    :          Quality Assurance Department
  • ABBREVIATIONS:
No.:Number
SOP:Standard Operating Procedure
QC:Quality Control
  • REVISION HISTORY:             

CHANGE HISTORY LOG

Revision No.Details of ChangesReason for ChangeEffective Date
00New SOPNot ApplicableTo Be Written Manual

Click the link to download word file copy of this document:
https://pharmaguidehub.com/product/spillage-handling-in-the-laboratory/

Share this article
Shareable URL
Prev Post

CALIBRATION OF MUFFLE FURNACE

Next Post

OPERATION OF VACUUM PUMP

Leave a Reply

Your email address will not be published. Required fields are marked *

Read next

Discover more from PharmaGuideHub

Subscribe now to keep reading and get access to the full archive.

Continue reading