CALIBRATION OF SHIMADZU HPLC WITH EMPOWER SOFTWARE (MODEL LC-2010CHT)
Acceptance Criteria: The maximum peak area response should be at 205 ± 2 nm. The minimum peak area response…
Browsing Tag
Calibration of QC instrument
15 posts
CALIBRATION OF LINOMAT 5 TLC SPOTTER (MAKE: CAMAG)
ANNEXURE NO. TITLE OF ANNEXURE Annexure-I Calibration of TLC Spotter Annexure-ICALIBRATION OF TLC SPOTTER
2 min read
CALIBRATION OF FOURIER TRANSFORM INFRARED SPECTROPHOTOMETER
Wave numbers (in cm –1 )…
2 min read
CALIBRATION OF ALLIANCE HPLC WITH EMPOWER SOFTWARE FOR PDA AND UV DETECTOR
Calibration schedule: Once in 6 months and after any major maintenance job. Oven Temperature Accuracy:…
8 min read
CALIBRATION OF GAS CHROMATOGRAPHY WITH EMPOWER SOFTWARE
Head space parameters Head space parameters Preparation IPA stock solution : Preparation of solutions for…
5 min read
CALIBRATION OF ALLIANCE HPLC WITH EMPOWER SOFTWARE
Acceptance Criteria: The maximum peak area response should be at 205 ± 2 nm. The minimum peak area response…
6 min read
CALIBRATION OF ATOMIC ABSORPTION SPECTROMETER
Step Temp (°C) Ramp time Hold time Internal flow Gas type 1 110 1 30 250 Normal 2 130 15 30 250 Normal 3 1500 10…
4 min read
CALIBRATION OF PARTICLE SIZE ANALYZER
Note: Alternatively, calibration shall be performed by the external expertise as per schedule.
1 min read
PROCEDURE FOR CALIBRATION OF POLARIMETER
Note: To the above acceptance limits add instrument Accuracy ± 0.01. ANNEXURE NO. TITLE OF ANNEXURE Annexure-I…
2 min read
CALIBRATION PROCEDURE FOR 8 M HARDNESS TESTERS (DR. SCHLEUNIGER)
ANNEXURE NO. TITLE OF ANNEXURE Annexure-I Hardness Tester Calibration Record Annexure-IHARDNESS TESTER…
2 min read