Your Compass for Pharma Success

REPLACEMENT OF VENT FILTERS FOR PURIFIED WATER STORAGE TANK AND REVERSE OSMOSIS PRODUCT WATER STORAGE TANK

  • OBJECTIVE:

To lay down a procedure for replacement of Vent Filters in Purified water system.

  • SCOPE:

This SOP is applicable for replacement of Vent Filters in Purified water system at {Company Name} {Company Location}.

  • RESPONSIBILITY:
  • Technical Assistant – Engineering is responsible to perform the activity as per the SOP.
  • Manager / Executive – Engineering shall ensure compliance as per SOP.
  • ACCOUNTABILITY:

Engineering Head

Head Quality Assurance

  • PROCEDURE:
  • Disconnect the Purified water storage tank Electric Vent Filter power supply.
  • Drain the water from tank drain valve.
  • Open the filter housing and remove the filter assembly.
  • Clean the filter housing with purified water.
  • Ensure that the correct specified filter is getting replaced at the time of replacement.
  • Fix the (0.2 µ) new filter element in the housing.
  • Fix the housing on the tanks.Collect the water in purified water into the tank.
  • Switch ‘ON’ the pump and check the working pressure of the line.Enter the Vent filter (0.2 µ) replacement details as per Annexure-II
  • After the completion of the filter replacement, Vent filter replacement report shall be updated as per Annexure-I.
  • REFERENCES:

  Not Applicable

  • ANNEXURES: 
ANNEXURE No.TITLE OF ANNEXURE
Annexure-IVent Filter Replacement Record
Annexure-IILabel for Replacement Details

Click the link to download word file copy of this document:
https://pharmaguidehub.com/product/replacement-of-vent-filters-for-purified-water-storage-tank-and-reverse-osmosis-producr-water-storage-tank/

ENCLOSURES: SOP Training Record.

  • DISTRIBUTION:
  • Controlled Copy No. 01                     Head Quality Assurance
  • Controlled Copy No. 02                 Head-Engineering
  • Master Copy                           Quality Assurance Department
  • ABBREVIATIONS:

PWST                            :          Purified water storage tank

ROPWST                      :          Reverse osmosis product water storage tank

  • REVISION HISTORY:
                                                             CHANGE HISTORY LOG
Revision No.Details of Changes Reason for ChangeEffective Date
00New SOPNot ApplicableTo be written manual

ANNEXURE-I
MODULE/MEMBRANEREPLACEMENT REPORT

MODULE/MEMBRANEREPLACEMENT REPORT

ANNEXURE-II
REPLACEMENT DETAILS

REPLACEMENT DETAILS

Click the link to download word file copy of this document:
https://pharmaguidehub.com/product/replacement-of-vent-filters-for-purified-water-storage-tank-and-reverse-osmosis-producr-water-storage-tank/

Share this article
Shareable URL
Prev Post

PROCEDURE FOR REPLACEMENT OF ULTRA FILTRATION MODULES, REVERSE OSMOSIS MEMBRANES, EDI MODULE AND OZONIA MEMBRANES

Next Post

AHU PARAMETER MONITORING

Leave a Reply

Your email address will not be published. Required fields are marked *

Read next

Discover more from PharmaGuideHub

Subscribe now to keep reading and get access to the full archive.

Continue reading