INVESTIGATION REPORT FOR CAPPING OBSERVED IN MULTIPLE TABLETS AFTER COMPRESSION STAGE
During routine in-process checks at the compression stage of Batch PGH/T/25-002, multiple tablets were observed…
Browsing Tag
Quality Control Department SOP
130 posts
INVESTIGATION REPORT FOR LOGBOOK FOR CHEMICAL OPEN AND CLOSE STATUS DID NOT CONTAIN
As per Good Documentation Practices (GDP) and SOP on Logbook Management and Chemical Handling, every chemical…
PHASE 1 INVESTIGATION REPORT FOR ASSAY FAILURE IN AMLODIPINE TABLETS 10 MG
During routine analysis of a finished product batch of Amlodipine Tablets 10 mg, the assay value was found to be…
OPERATION OF BOD INCUBATOR (Make: Newtronic)
BOD (Biochemical Oxygen Demand) incubators are critical in pharmaceutical quality control and research. While…
PREPARATION OF TEST SOLUTIONS, INDICATOR SOLUTIONS AND LIMIT TEST STANDARD SOLUTIONS
In pharmaceutical analysis, test solutions are reagents prepared for specific analytical procedures to determine…
REPORTING OF ANALYTICAL VALUES AND ROUNDING OFF THE DIGITS
In the pharmaceutical industry, reporting of analytical values and rounding off digits is very important for…
OPERATION OF DISINTEGRATION TEST APPARATUS
A disintegration test apparatus is a laboratory instrument used in pharmaceutical testing to determine the time…
PROTOCOL FOR THE VALIDATION OF DISINFECTION / SANITIZATION AGENTS
Validation of disinfection and sanitization is a critical process in ensuring the effectiveness of cleaning…
VENDOR QUALIFICATION
Vendor qualification in the pharmaceutical industry is a process used to ensure that suppliers provide materials…
TRAINING MANUAL
A training manual in the pharmaceutical industry serves as a comprehensive guide for employees, outlining…